Table of Contents
Advertisement
13 BRAKE SYSTEM
13.2
164
Adjusting the basic position of the hand brake lever
E01099-10
wheels may lock during braking. The brake system itself stays
functional; only ABS control is not available.
The ABS warning lamp may also light up if the rotating speeds
of the front and rear wheels differ greatly under extreme riding
conditions, for example when making "wheelies" or if the rear
wheel spins. This causes the ABS to switch off.
To reactivate the ABS, stop the vehicle and switch off the igni-
tion. The ABS is reactivated when the vehicle is switched on
again. The ABS warning lamp goes out when you start off.
–
Adjust the basic position of the hand brake lever to your hand
size by turning adjusting wheel
Info
Push the hand brake lever forward and turn the
adjusting wheel.
Do not make any adjustments while riding.
1
.
Advertisement
Table of Contents
