Husqvarna SVARTPILEN 401 Owner's Manual page 85

COMBINATION INSTRUMENT 7
Info
The RPM2 display appears in the TRIP 2 display for
each menu by keeping the MODE button pressed.
RPM2 is the engine speed above which the shift
warning light lights up.
The engine speed can be set at intervals of 50.
The shift speed RPM2 can only be set from a min-
imum of 50 revolutions per minute above the shift
speed RPM1.
–
Set the speed with the MODE button and SET button.
Info
The MODE button increases the value.
The SET button decreases the value.
–
Press the MODE button and SET button simultaneously.
The RPM2 display disappears and the set shift speed
RPM2 is adopted and saved.
83