Husqvarna SVARTPILEN 401 Owner's Manual page 242

18 SERVICE WORK ON THE ENGINE
240
–
Remove screws
ring.
–
7
Pull oil filter
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surface.
E01120-10
–
Insert new oil filter
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil will result
E01301-10
in premature wear of the engine.
5 6
. Take off oil filter cover
out of the oil filter housing.
7
.
M6 10 Nm (7.4 lbf ft)
with the O-
6
.