7.18
Adjusting the shift speed RPM1
COMBINATION INSTRUMENT 7
–
Set the hours display using the MODE button.
–
Set the minutes display using the SET button.
–
Press the MODE button and SET button simultaneously.
The set time is adopted and saved.
Condition
The motorcycle is stationary.
ODO > 1000 km (621 mi).
–
Press the MODE button briefly and repeatedly until TRIP 1
appears on the display.
–
Press the MODE button for 5 seconds.
The RPM1 display appears.
Info
The RPM1 display appears in the TRIP 1 display for
each menu by keeping the MODE button pressed.
RPM1 is the engine speed above which the shift
F01400-01
warning light starts flashing.
The engine speed can be set at intervals of 50.
The shift speed RPM1 can only be set up to maxi-
mum 50 revolutions per minute below the shift speed
RPM2.
–
Set the speed with the MODE button and SET button.
81