Table of Contents
Advertisement
Setting the date
Use the rotary selector to set the current day.
1.
Press
.
2.
Use the rotary selector to set the current month.
3.
Press
.
4.
Use the rotary selector to set the current year.
5.
Press
.
6.
a The next setting appears.
Setting the water hardness
Use the rotary selector to set the hardness.
1.
Press
.
2.
a A notification appears on the display confirming that
the initial configuration is complete.
7.3 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
Remove the product information and the accessor-
1.
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
The
button lights up blue.
‒
a The Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
Press
to switch the appliance off.
▶
The light above the
‒
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each cooking operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
Press
to start the operation.
▶
a The settings, the run time and the heat-up line ap-
pear on the display.
button goes out.
Wipe the smooth surfaces in the cooking compart-
2.
ment with a soft, damp cloth.
Fill the water tank .
3.
Press
to switch the appliance on.
4.
5.
Apply the following settings:
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 15
Press
to start the operation.
6.
Ventilate the kitchen while the appliance is heat-
‒
ing.
When the cooking time has elapsed, press
7.
switch the appliance off.
Once the appliance has cooled down, clean the
8.
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
Empty the water tank and dry the cooking compart-
9.
ment.
→ "After every steam operation", Page 19
Clean the accessories thoroughly using a detergent
10.
solution and a dish cloth or soft brush.
8.4 Pausing or cancelling operation
You can briefly pause the operation and then continue.
If you cancel the operation completely, the settings are
reset.
To pause the operation briefly:
1.
Briefly press
‒
To continue the operation, press
‒
2.
To cancel the operation, press
a The operation stops and all of the settings are reset.
8.5 Setting an operating mode
Requirement: The appliance must be switched on.
Press
.
1.
The operating modes menu opens.
Press the operating mode that you require.
2.
Various options are available depending on the op-
erating mode.
The selection can be changed using the rotary se-
3.
lector.
Change any further settings depending on the selec-
tion.
Press
to start.
4.
8.6 Setting the type of heating and the
temperature
When you switch on the appliance, the types of heating
operating mode is set automatically.
Turn the rotary selector to select the required type
1.
of heating.
2.
Press the temperature.
Use the rotary selector to set the temperature.
3.
Press
to start the operation.
4.
Basic operation en
4D hot air
with added
steam ("high" intensity)
Maximum
1 hour
.
.
.
to
15
Advertisement
Table of Contents
