Add Device - RGBlink UMS4 pro User Manual

Fill in the file name and click save.
Settings on the software will be saved in the file and you
can directly load the file next time.
Now you will enter MPS boot interface.

3.3 Add Device

Display Device
Display device includes projector,LED screen and LCD
screen.
The number of devices is determined according to the
actual situation of the site. At most, the number of
devices is unlimited.When adding devices, IP address,
device name and resolution should be confirmed.
Add Device
There are 2 ways to add device
1. You can click the top menu bar -- "Device" -- "Add
Output", and the "Add Device" box will appear.
2. Click "Add Device" in the toolbar at the bottom of
the Device List.
UMS4 pro User Manual 16