Table of Contents
Advertisement
4. Select the monitor
Tick the monitors need splicing
Refresh Rate:29.97/30hz
Resolution:600×480|720×480|720×576|800×600|1024×768|
1176×664|1280×720|1280×1024|1600×1024|1680×1050|
1920×1080|3840×2160
Click "Next"to continue
5. Arrange the monitor
Left-click and drag the signals to the display layout.
After setting,click"Apply".
Note: The sequence of splicing display must be consistent with the factual situation.
3.2 Software Installation
Environment Requirement
Windows
64 位 Win7,Win10
LAN Environment
Put the control computer and media server in the LAN environment, the supported communication protocol is
TCP/IP protocol. (In order to ensure the quality of network communication, wireless network environment is not
recommended.)
MPS Server requires both the Client and the Server to be installed. Both can be installed on the same device.
In most cases, the client and server need to be installed respectively,so you need to install the client on the
controller and the server on the playback server.
UMS4 pro
User Manual
14
Advertisement
Table of Contents
