Changing One Touch And Speed Dial Numbers - Brother MFC-9660 Owner's Manual

Changing One Touch and Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a number is already stored,
the screen displays the current name stored there, then prompts you to either change it or exit.
1
Press Menu, 2, 3, 1 and press the One Touch Dial key where you want to change the number.
—OR—
Press Menu, 2, 3, 2 and use the dial pad to enter a two-digit location (00-99), and press Set.
2
Press 1 to change the number stored, or press 2 to exit without making a change.
3
Enter a new number.
N If you want to erase the number, press Clear when the cursor is to the far left of the digits.
N If you want to change a digit, use
to change, then enter the new digit—OR—Press Clear to delete all characters above and to
the right of the cursor.
4
Follow the directions in Storing One Touch Dial or Speed Dial Numbers.
You can print a list of all stored numbers. (See Using the Reports Key, page 34.)
20
Chapter 1
or to position the cursor under the digit you want