Brother MFC-9660 Owner's Manual page 27

Setting the Dialling Mode (Tone/Pulse)
The machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting
to PULSE by following the steps below.
1
Press Menu, 1, 9. The screen prompts you to select PULSE (or TONE).
2
Use or to select the dialling mode.
3
Press Set when the screen displays the dialling mode you want.
4
Press Stop/Exit.
Lower Tray (With Optional Paper Tray Only)
You can set the machine to recognize the optional lower tray. When Lower Tray is set to ON, you can
set which tray you want to use for faxes or for copies. For printer setting, see Paper Source, page 67.
1
After setting up the optional paper tray, press Menu, 2, 0, 2.
2
Press or
3
Press Set.
When the optional LOWER TRAY is set to ON, you can set the tray usage.
The default setting of AUTO allows the machine to choose the lower tray if paper is out in the upper
tray. Choose UPPER or LOWER if you want to keep special paper in the other tray and control
when it is used.
4
To set tray usage for faxes, press
—OR—
To set tray usage for copies, press
5
Press or
6
Press Stop/Exit.
18
Chapter 1
to turn ON (or OFF).
or
to select AUTO, UPPER or LOWER and press Set.
to select FOR FAX, and then press Set.
to select FOR COPY, and then press Set.
or