Brother MFC-9660 Owner's Manual page 173

Remote access code The four-digit code that allows you to call and access the machine from a
remote location.
Resolution The number of horizontal and vertical lines per inch.
Ring Delay The number of telephone rings before the machine answers a call in Fax/Tel (F/T) or
Fax Only Mode.
Ring Volume Volume setting for the fax machine's ring.
Scanning The process of sending an electronic image of an original paper document into your
computer.
Search You can search for names you have stored in One Touch and Speed Dial memories.
Speaker Volume You can set the volume of the machine speaker.
Speed dial A preprogrammed number for easy dialling. You must press the Search/Speed Dial
key and #, then two digit code to start the dialling process.
Standard resolution 203 x 98 dpi. It is used for regular size text and quickest transmission.
Station ID The stored information that appears on the top of faxed pages. It includes the sender's
name and fax number.
Super fine resolution 203 x 391 dpi. Best for very small print and line art.
System Setup List A printed report that shows the current setting of the machine.
Temporary Setting You can select certain options for each fax transmission or copy without
changing the default settings.
Timer A feature that lets you program a fax to go out at a certain time, such as Delayed Fax or
Delayed Polling Receive.
Tone A form of dialling on the telephone line used for Touch Tone telephones.
Toner cartridge An accessory that holds toner for the drum unit on Brother laser models.
Toner Save A process that causes less toner to be affixed to the page to extend the life of the toner
assembly. This will make the receiving document significantly lighter.
Transmission The process of sending documents over the phone lines from the machine to the
receiving fax machine.
Xmit Report (Transmission Report) A listing of each transmission, showing date, time, and
number of pages.
164