Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tiffen STEADICAM VOLT
Summary of Contents for Tiffen STEADICAM VOLT
- Page 1 GoPro compatible GOPRO® Compatible* LIT-817000 rev. A...
- Page 2 Sie auf: ™ • USB charge cable https://tiffen.com/steadicamvolt/ • Carrying bag Questa guida in altre lingue, informazioni sulla garanzia e ulteriori • Quick start guide dettagli su Steadicam Volt sono presenti su: ® ™ https://tiffen.com/steadicamvolt/ Visit store.tiffen.com for accessories.
-
Page 3: Get Started
Do not leave batteries charging unattended. • Red LED: indicates charging in progress. Unfold the Blue LED: indicates charging complete. • Arc. Download the Tiffen Imagemaker App from your phone’s app ™ store to expand your camera’s video recording functionality. Unfold support brace and clip to the Arc. - Page 4 Setup Setup Remove Unfold battery gimbal cover handle. and install charged batteries. Open the Ensure power phone switch is mount. turned OFF.
- Page 5 Note: the stabilizer must have batteries installed, but remain powered OFF during the balance procedure. Small phones may require the use of a phone case or button Visit tiffen.com for how-to videos and further instructions on clearance pad to ensure a secure fit. balancing Steadicam Volt ®...
- Page 6 Balancing Balancing Lighten your If the base is too grip on the light, thread in the base, and if the starter weight and base rises up re-test. out of hand, Still too light? Add the base is too balance weights light for your until the base does device.
- Page 7 Balancing Balancing Tilt UP To fine tune Tilt DOWN top-to-bottom balance, dial the weight Hold stabilizer upright by adjuster until the gimbal handle and the stabilizer level the stabilizer fore-aft remains by turning the adjuster horizontal as knob as needed. seen below.
- Page 8 5, 6 and 7 until Steadicam ® Volt balances ™ in all axes. Use your device’s camera mode or launch the Tiffen ® Imagemaker App for enhanced camera features. ™ Visit tiffen.com for how-to videos and further instructions on balancing Steadicam Volt ®...
- Page 9 LED’s after power up indicates an error condition. Operational modes: Two presses of the mode button engages Movie Mode, one press returns to default Sport Mode. Sport Mode: motors have maximum influence. • • Movie Mode: gives experienced operators additional control. Visit tiffen.com for additional operating tips.
-
Page 10: Gopro Mount
GoPro mount GoPro mount Go to https://tiffen.com/steadicamvolt/ for camera compatibility and setting configurations. Remove the phone mount Install your by turning the GoPro adjustment camera, knob clockwise adjust and and sliding the add weights mount off. as shown in step... -
Page 11: Specifications
Important: By using the Steadicam Volt, user assumes full responsibility for any damage Mechanical specifications: to any device attached to The Steadicam Volt that may arise other than from a defect in Approx. dimensions folded: 255mm x 100mm x 70mm the Steadicam Volt. -
Page 12: Warranty
Tiffen’s obligation under its warranty policy is limited at its option, to either repair or replace the defective product. If the product has been superseded, warranty replacement can be made with a current model of the same quality performing the equivalent function.
Need help?
Do you have a question about the STEADICAM VOLT and is the answer not in the manual?
Questions and answers