Basic Operations; Turning On The Power - JVC KD-SH9750 Instructions Manual

D
SRC
DISP
ATT
1, 3
2

Turning on the power

1
Turn on the power.
ATT
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
Each time you press the button,
SRC
the source changes as follows.
For KD-SH9750:
1
*
TUNER CD
For KD-SH9700:
1
*
CD
TUNER
1
* If a disc is not in the loading slot, you cannot
select CD as the source to play.
2
* Without connecting the CD changer, you
cannot select it as the source to play.
3
*
When "Line In" is set to "Off" in the PSM
setting, you cannot select "LINE IN" as the
source (see page 42).
4
*
To select "LINE IN" as the source, select
"Line in" for the "Ext Input" setting on
page 42.
1 2 3 4
SEL
* 2
3
*
CD-CH LINE IN
(CD changer)
2
*
* 4
CD-CH or LINE IN
(CD changer)

BASIC OPERATIONS

BBE
MODE
5 6 M
3
Adjust the volume.
ATT
Current sound (iEQ) mode (see page 28)
4
Select the DSP mode and sound
mode as you want.
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press for more than 1 second.
• If you turn off the power while listening to a
disc, playback will start from where playback
has been stopped previously, next time you
turn on the power.
Display indication:
If you have changed
some PSM items (see
page 40), the
indications on the
display you see may be
different from those used
in this manual.
Clock time
Current DSP mode (see page 25)
7