JVC KD-SH9750 Instructions Manual page 16

• Display indications when inserting an
audio CD or a CD Text:
1 Total track number
2 Total playback time of the disc
3 Disc title/performer (if no title is recorded or
assigned*, "No Name" appears.)
4 Track title (if no title is recorded, "No Name"
appears.)
5 Current track number
6 Elapsed playing time of the current track
* If a name has been assigned to the audio CD (see
page 44), it will be shown on the display.
Notes:
• When a disc is already in the loading slot, selecting "CD" as the source starts disc play.
• The unit cannot read or play an MP3 track without the extension code <mp3>, and a WMA track without
the extension code <wma>.
• When a disc is inserted upside down, the disc automatically ejects.
• If you change the source, playback also stops (without ejecting the disc).
Next time you select "CD" as the source, disc play starts from where it has been stopped previously.
To stop play and eject the disc
Press 0.
Playback stops, the control panel moves down,
and the disc automatically ejects from the loading
slot.
If you change the source, the disc play also stops
(without ejecting the disc this time).
16
2 3 4
1
5
6
• Display indications when inserting an
MP3 or a WMA disc
1
3
6
1 Total folder number
2 Total track number
3 Disc type—MP3 or WMA
4 Album name/performer (or folder name
"Tag" is set to "Off"—see page 41, or when no Tag
is recorded)
5 Track title (or track name
"Off"—see page 41, or when no Tag is recorded)
6 Current folder number
7 Current track number
8 Elapsed playing time of the current track
To return the control panel to its previous
position, press 0 again.
• If you keep the loading slot open for about 1
minute, (beeps sound when the "Beep" setting
is turned "On"—see page 42) the control panel
returns to its previous position.
Be careful not to get the disc or your finger
caught in between the control panel and the
unit.
2
4 5
7
8
when
when "Tag" is set to