Making Sounds Natural-Bbe Digital - JVC KD-SH9750 Instructions Manual

To adjust the input level of each source
—Vol Adj:
This setting is required for each source
except FM. Before making an adjustment,
select an appropriate source for which you
want to make an adjustment.
Once you have made an adjustment, it is
memorized, and you will not need to adjust
the volume level each time you change the
source.
Adjust to match the input level to the FM
sound level.
• You cannot make an adjustment if the
source is FM. "FIX" will appear.
To increase the level.
ATT
To decrease the level.
If the (INPUT OVER) indicator appears
on the display, and sounds are distorted
The input level through the external component (LINE
IN) is set at a high level (more than 1.5 Vrms).
If this happens, adjust the output level on the
connected component so that the
(INPUT OVER) indicator will not appear.
(INPUT OVER) indicator
Making sounds natural
—BBE Digital
BBE Digital* is a new digital processing method
to restore the brilliance and clarity of the original
live sound in recording, broadcasts, etc.
When a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach
the ear than low frequency sounds. BBE Digital
adjusts the phase relationship between the low,
mid and high frequencies by adding a
progressively longer delay time to the low and
mid frequencies, so that all frequencies reach the
listener's ears at the proper time.
1
Show the BBE Digital adjustment
screen.
The current BBE level is shown
BBE
on the display.
2
Select the effect level.
Each time you press the button,
BBE
the effect level changes as
follows:
BBE 1
As the number gets higher, the effect level
becomes stronger.
When shipped from the factory, the effect level is
set to "BBE Off" (BBE Digital is canceled).
Note:
If "V.CANCEL" is selected for the DSP mode, you
cannot change the BBE level.
* Manufactured under license from BBE Sound,
Inc.
Licensed by BBE Sound , Inc. under USP4638258
and 4482866. BBE and BBE symbol are
registered trademarks of BBE Sound, Inc.
BBE 2 BBE 3
BBE Off
(Canceled)
31