NuWave Bravo XL Owner's Manual page 12

INSTRUCTIONS
SEAR 1, SEAR 1 2, DELAY,
and WARM with STAGE
COOKING
Example: Delay for 1 hour »
adjust to 350F (177C) (Sear
1) for 4 min. » Cook at 325F
(165C) for 20 min. (Stage 1)
» Cook at 300F (150C) for 40
min. (Stage 2) » Cook at 350F
(177C) for 15 min. (Stage 3) »
Cook at 400F (204C) for 5 min.
(Sear 1 2) » WARM at 125F
(50C) for 30 min.
1. Press ON/OFF. Adjust
temperature to 325F (165C)
by turning START/PAUSE,
350F (177C) is the default.
2. Press TEMP/TIME. Adjust
time to 20 min. by turning
START/PAUSE.
3. Press PROG and
TOP/BTM at the same
time to set delay. Turn
START/PAUSE to adjust
time to 1 hour ("01:00").
22 22
instructions
4. Press SEAR once. Turn
START/PAUSE to adjust
temperature to 350F
(177C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 4 min. 1 will
be displayed.
5. Press STAGE. Turn
START/PAUSE to adjust
temperature to 300F
(150C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 40 min.
6. Press STAGE again. Turn
START/PAUSE to adjust
temperature to 350F
(177C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 10 min.
7. Press SEAR again. Turn
START/PAUSE to adjust
temperature to 400F
(204C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 5 min., 2 will
flash.
8. Press WARM. Turn
START/PAUSE to adjust
warming temperature to
125F (50C). Press TEMP/
TIME. Turn START/PAUSE
to adjust warming time to
30 min.
9. Press START/PAUSE to
begin the cooking process.
Notes:
• During cooking, the Bravo
will display all functions
programmed for that
cooking cycle. The function
that the Bravo is currently
cooking in will flash.
• The remaining time for
that function or stage will
count down and colon (:)
will flash. The remaining
functions for that cycle will
remain displayed.
LOCK
Lock is used to stop the function
of the Bravo. While in Lock
mode, your Bravo's buttons will
not respond to any action until
the unit is unlocked.
1. Press ON/OFF. Set
cooking temperature. (See
TEMP/TIME.)
2. To lock unit functions,
press PROG and STAGE
at the same time.
Remaining cooking time
will be displayed.
• NO buttons will function
during Lock except
LIGHT and
ON/OFF.
3. To unlock your Bravo's
functions, press PROG and
STAGE at the same time
once again. The Bravo will
unlock and the Lock icon
will no longer be displayed.
• ON/OFF button will work
during Lock function if
the Bravo needs to be
turned off.
PROBE
The digital Temperature Probe
is used to show an accurate
internal temperature of food.
Default – 165F (74C).
1. Insert end of Temperature
Probe into your food.
Place food in oven. Leave
enough of the wire to exit
the oven over the top of
the door.
2. Insert other end of Probe
(Plug) into the Probe Input
(Jack).
3. Press ON/OFF. Adjust
desired cooking
temperature.
4. Press and hold PROBE for
1 second.
5. Adjust the Probe
temperature to the
desired internal cooked
temperature. Temperature
range is 50F ~ 212F (10C
~ 100C).
Note:
The Bravo will cook your
food until Probe temperature
is reached. If time runs out
before Probe temperature
is reached, the unit will
continue to cook until Probe
temperature is achieved.
6. Press START/PAUSE.
The current internal
Probe temperature will be
displayed.
7. Press TEMP/TIME to
display the set cooking
temperature, default is
350F (177C).
23 23
nuwavenow.com nuwavenow.com