Houghton BELAIRE Owner's Manual page 9

Square
(
14 3/16" 14 3/16"
Moving direction of caravan
Plenum position
Install outlet gasket
● Mare sure the roof is dry, clean and without oil before installation.
● Take off the paper from the back of the outlet gasket, and stick the outlet gasket onto the roof over the square hole.
● Press the outlet gasket to make sure the outlet gasket is closely adhered to the roof.
● Fill the silicon glue around the outlet gasket to make sure no leakage happens.Please note the silicon glue cann't touch
the rooftop unit.
Install outdoor unit
● Place the outdoor unit over the outlet gasket and adjust position to make sure the 4 bolts under the outdoor unit are
aligned with the 4 corners of the square hole(360 360mm).When
needs to go to the inside of caravan to ensure the alignment.
● Do not push or pull the outdoor unit directly, otherwise, it will cause damage to the outlet gasket and lead leakage of air
and water.
● The 4 holes which receives M8 bolts on the base of the outdoor unit should align with the 4 corners of the square
hole(360 360mm)on ×
hole
× inch)
6 1/8"
the roof.
14 3/16"
14 3/16"
21 15/16"
The silicon glue should
go in a close circle
× position of outdoor unit is being adjusted,a person
6
Unit: inch
21 1/8"
19"
Position of rooftop unit