Related Manuals for IBASE Technology MPT-1000R
Summary of Contents for IBASE Technology MPT-1000R
- Page 1 MPT-1000R ® ® Intel Atom x7-E3950 Processor Railway Computer System User’s Manual Version 1.0...
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
-
Page 3: Compliance
0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by weight (100 ppm). • Lead (Pb) • Mercury (Hg) • Cadmium (Cd) • Hexavalent chromium (Cr6+) • Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) MPT-1000R User Manual... -
Page 4: Important Safety Information
Avoid Disassembly Do not disassemble, repair or make any modification to the device. Doing so could generate hazards and cause damage to the device, even bodily injury or property damage, and will void any warranty. MPT-1000R User Manual... -
Page 5: Caution
Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, you can download the RMA form at http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and contact your distributor or sales representative. MPT-1000R User Manual... -
Page 6: Table Of Contents
2.1.9 Pinout for M12 Connectors (Power Input, LAN, USB, CANbus) Setting the Jumpers ................22 2.2.1 How to Set Jumpers ..............22 Jumper & Connector Locations .............. 23 MPT-1000R User Manual... - Page 7 Boot Settings ..................63 Save & Exit Settings ................64 Appendix ...................... 65 I/O Port Address Map ................66 Interrupt Request Lines (IRQ) ..............68 Watchdog Timer Configuration ............... 69 MPT-1000R User Manual...
-
Page 9: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: Features Packing List Specifications Product View Dimensions ... -
Page 10: Introduction
1.1 Introduction The MPT-1000R Intelligent Traffic Image Computer was developed for rolling stock applications, with features that meet IIOV, Intelligent Internet of Vehicle and harsh outdoor environment requirements. The shock-resistant system is powered by an Intel® Atom® x7 processor, operating in extended temperatures between -40°C and 70°C and with 9V-32VDC power input. -
Page 11: Features
Terminal Block C1216ECH311003100P Screw, B71-BN, M3*L5mm H0230561B710BN000P Cover for audio (black) A028AUDIOMB2K0000P Flat head screw, A2-N, M2*L4 H02203511122000N0P Screw, B21, Nickel, I head, H0230321112200000P M3*3.8 * Optional items include WiFi antennas, 4G antenna, hole plugs for antenna MPT-1000R User Manual... -
Page 12: Specifications
1x M12 8-pin A-code for 2 master CANbus, isolated External I/O 2x USB 2.0 type-A, isolated 1x M12 4-pin A-code for power input 1x blade fuse 2x 2.5” device bay for SSD/HDD Storage 1x mSATA via miniPCIe slot (shared with one 2.5” device) MPT-1000R User Manual... - Page 13 Function: 1m/S2, 5Hz~150Hz (EN 61373) Vibration Lifetime: 7.9m/S2, 5Hz~150Hz (EN 61373) Shock 50 m/S2, 30 msec (EN61373) EN50155: 2017 Certification CE (EN62368/ EN55032/ EN55025)/ FCC Class A EN45545-2 All specifications are subject to change without prior notice. MPT-1000R User Manual...
-
Page 14: Product View
1. The programable LED can be set by customized program, please contact IBASE technical support to get the SDK software. 2. If you would like to enable A-on (expansion cards, ex: miniPCIe/M.2 module) reset button function, please contact IBASE technical support to get the SDK software. MPT-1000R User Manual... - Page 15 Ground All isolated Important: The MPT-1000R main power input range is DC9~32V. If your power source is out of range, the system will hold power and not boot up. You will see the red light blinking from the LED indication.
- Page 16 Oblique View Side View MPT-1000R User Manual...
-
Page 17: Dimensions
General Information 1.6 Dimensions Unit: mm MPT-1000R User Manual... - Page 18 Unit: mm Fuse for MPT-1000R: Littlefuse ® TAC ATO ® Style Blade 15A, 58V DC MPT-1000R User Manual...
-
Page 19: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration The information provided in this chapter includes: Installations Information and locations of connectors ... -
Page 20: Installations
Please contact IBASE authorized partners and get the technical service from them. To access the memory slot on the motherboard, you have to first remove the top cover by removing the 12 screws as shown below. MPT-1000R User Manual... - Page 21 When removing the top cover, you must first remove the battery module cover* as shown below. *When removing the battery module cover, you have to release the cable that is connected to the motherboard in order not to damage the cable or the motherboard. MPT-1000R User Manual...
- Page 22 To remove the module, press the clips outwards with both hands. After installation, fasten the 12 screws to secure the cover. MPT-1000R User Manual...
-
Page 23: Rtc Battery Installation
Remove the 3 screws of the cover shown below. Turn the cover upside down to place the battery (ABP-MB70-BAT, part # ZM06ABPMB70B0A1100P). Pay attention to the polarity by following the + / - symbols in the battery compartment. MPT-1000R User Manual... -
Page 24: Ssd Drive Installation
SSD drive. 2.1.4 Wall Mount Brackets Installation There are a total of four screws holding the two wall mount brackets underneath the system. Use them to install/remove the brackets as shown below. MPT-1000R User Manual... -
Page 25: Fuse Installation
Style Blade 15A, 58V DC 2.1.6 SIM Card Installation The SIM card cover uses one screw. Remove this screw to see the SIM card holder for two SIM cards. Poke the rejection hole of holder to release MPT-1000R User Manual... -
Page 26: Minipcie, Msata, And M.2 (B-Key) Installation
(bottom in the picture) is for M.2 B-key 30x42 with USB 2.0 and USB 3.0 signal, supporting 2x SIM cards. Remark: (MPT-1000R has 2 SIM card slots. Some LTE M.2 modules supoort 2 SIM cards, you can set the SIM card1 and SIM card 2 to the M.2 module(This is default setting), or you can set the SIM card2 to the second miniPCIe (By jumper on motherboard). - Page 27 Hardware Configuration The above picture shows the 3 sockets after the cover has been removed. MPT-1000R User Manual...
-
Page 28: Usb Socket Cover
2.1.8 USB Socket Cover There is a non- isolated USB socket with a cover. To use the USB socket (for devices such as USB mouse or USB keyboard), remove the single screw that is holding the cover. MPT-1000R User Manual... - Page 29 MX2- MX3- MX4+ MX3+ MX1- MX4- MX2+ USB Connector (M12, 4 pins, female, A-code) Assignment Assignment VCC (+5V) Data + Data - Ground CANBus Connector(M12, 8 pins, male, A-code) Assignment Assignment CAN-1H CAN-2H CAN-1L CAN-2L MPT-1000R User Manual...
-
Page 30: Setting The Jumpers
2.2 Setting the Jumpers Set up and configure your MPT-1000R by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. 2.2.1 How to Set Jumpers Jumpers are short-length conductors consisting of several metal pins with a non-conductive base mounted on the circuit board. -
Page 31: Jumper & Connector Locations
Hardware Configuration 2.3 Jumper & Connector Locations Motherboard: MBT-1001 MBT-1001 - top MPT-1000R User Manual... -
Page 32: Jumpers And Connectors Quick Reference
CN11: USB 2.0 Connector (Supports USB 1.0 only) CN3: COM Port Connector (RS-485 only) CN4: COM Port Connector (RS-232,422,485) CN5: Digital I/O Connector CN6: MIC-IN Connector CN7: Line Out Connector CN10: DVI-D Connector CN13: Dual Nano SIM Connector CN14, CN15: SATA Connector MPT-1000R User Manual... - Page 33 Hardware Configuration 2.4.1 JP1: COM2 Terminator Enable Function Illustration Disabled Open (Default) Pin 1-2 Enabled Closed 2.4.2 JP3: BIOS Flash Function Illustration Open Normal Pin 1-2 Upgrade Closed MPT-1000R User Manual...
- Page 34 2.4.3 JP4: Car Battery Protect (Not used) Function Pin closed Illustration 9~16V 18~30V 2.4.4 JP5: Clear ME Register Function Pin closed Illustration Normal (default) Clear ME Register MPT-1000R User Manual...
- Page 35 Hardware Configuration 2.4.5 JP6: Second SIM Card Select Function Pin closed Illustration To M.2 To Mini PCIe 2.4.6 JP10: Reset Button Connector Pin# Signal Name Reset# Ground MPT-1000R User Manual...
- Page 36 2.4.7 SW1: MCU Reset 2.4.8 SW2: Clear CMOS 2.4.9 SW3: Power Button MPT-1000R User Manual...
- Page 37 SW4: Add-on Reset (Customer use only) Add-on reset function works with customized software program. If you would like to use this function, please contact IBASE to get the SDK. 2.4.11 SW5: Digital Input simulation (Factory use only) MPT-1000R User Manual...
- Page 38 Signal Name Pin # Pin# Signal Name CAN_DH1 CAN_DH2 GND_CAN1 GND_CAN2 CAN_DL1 CAN_DL2 GND_CAN1 GND_CAN2 2.4.13 J3: SPI Flash Connector (Factory use only) Signal Name Pin # Pin# Signal Name SPI_CS +3.3V SPI_SO SPI_HOLD SPI_WP SPI_CLK SPI_SI MPT-1000R User Manual...
- Page 39 Hardware Configuration 2.4.14 J4: Port 80 connector (Factory use only) 2.4.15 J5: Mini PCI-e Connector (PCI-e, SATA, USB2) 2.4.16 J6: DC-IN Connector Pin# Signal Name 9~32V 9~32V MPT-1000R User Manual...
- Page 40 2.4.17 J7, J15: Dual USB Connector (DF11-8S-PA66H) Signal Name Pin # Pin# Signal Name VBUS0 VBUS1 2.4.18 J8: MCU firmware Connector (Factory use only) Pin# Signal Name MCU_VCC MPT-1000R User Manual...
- Page 41 Hardware Configuration 2.4.19 J9: Mini PCI-e Connector (PCI-e, USB2) 2.4.20 J10: DDR3-L Connector * Supports ECC only 2.4.21 J12: M.2 B-Key 3042 Connector (USB3, USB2) MPT-1000R User Manual...
- Page 42 DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator Not Used 2.4.23 J16: VGA Connector (DF11-16DP-2DSA) Signal Name Pin # Pin# Signal Name CRT_R CRT_VCC CRT_G CRT_B DDC_DATA HSYNC VSYNC DDC_CLK MPT-1000R User Manual...
- Page 43 Hardware Configuration 2.4.24 J17, J18: LAN Connector (DF11-8DP-2DSA) Signal Name Pin # Pin# Signal Name MDI0+ MDI0- MDI1+ MDI1- MDI2- MDI2+ MDI3+ MDI3- 2.4.25 J19: USB 2.0 Connector (USB 1.1 only) Pin# Signal Name VBUS MPT-1000R User Manual...
- Page 44 2.4.26 CN1, CN2: USB 2.0 Connector (Supports USB 1.1 only) 2.4.27 CN11: USB 2.0 Connector (Supports USB 1.0 only) 2.4.28 CN3: COM Port Connector (RS-485 only) MPT-1000R User Manual...
- Page 45 Hardware Configuration 2.4.29 CN4: COM Port Connector (RS-232,422,485) 2.4.30 CN5: Digital I/O Connector Pin# Signal Name OD-OUT0 OD OUT1 MPT-1000R User Manual...
- Page 46 2.4.31 CN6: Mic-In Connector 2.4.32 CN7: Line Out Connector 2.4.33 CN10: DVI-D Connector MPT-1000R User Manual...
- Page 47 Hardware Configuration 2.4.34 CN13: Dual Nano SIM Connector 2.4.35 CN14, CN15: SATA Connector MPT-1000R User Manual...
-
Page 48: Chapter 3 Driver Installation
Chapter 3 Driver Installation The information provided in this chapter includes: Intel ® Chipset Software Installation Utility VGA Driver Installation HD Audio Driver Installation LAN Driver Installation Intel ® Trusted Execution Engine Installation Intel ®... -
Page 49: Introduction
Chipset drivers should be installed first before the software drivers to install INF files for Plug & Play function for the chipset components. Follow the instructions below to complete the installation. Insert the DVD enclosed in the package. Click Intel and then Intel(R) Apollolake Chipset Drivers. MPT-1000R User Manual... - Page 50 When the Welcome screen to the Intel Chipset Device Software appears, click Next to continue. Click Yes to accept the software license agreement and proceed with the installation process. When the driver has been completely installed, click Finish to complete the setup process. MPT-1000R User Manual...
-
Page 51: Vga Driver Installation
Click Yes to agree with the license agreement and continue the installation. Click Next after reading th Readme File Information. Click Next in the Setup Progress screen. When Setup is Complete, restart the computer for changes to take effect. MPT-1000R User Manual... -
Page 52: Realtek Hd Audio Driver Installation
Click Intel and then Intel(R) Apollolake Chipset Drivers. Click Realtek High Definition Audio Driver. On the Welcome screen of the InstallShield Wizard, click Next to continue. When the InstallShield Wizard has successfully installed the Realtek High Definition Audio Driver, restart the computer. MPT-1000R User Manual... -
Page 53: Lan Driver Installation
On the Setup Options screen, click the checkbox to select the desired driver(s) to install. Then click Next to continue. The wizard is ready to make the installation. Click Install. Install wizard has completed the installation, click Finish. MPT-1000R User Manual... -
Page 54: Intel Trusted Execution Engine Installation
When the Weocome screen appears, click Next to continue. Accept the license agreement and click Next to continue. In the Confirmation screen, click Next to continue. When the Intel® Trusted Execution Engine has been successfully installed, click Finish.. MPT-1000R User Manual... -
Page 55: Intel Serial I/O Driver Installation
Accept the license agreement and click Next to continue. In the Readme File Information screen, click Next to continue In the Confirmation screen, click Next to continue When the Intel® Serial I/O has been successfully installed, click Finish. MPT-1000R User Manual... -
Page 56: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter the different settings available in the AMI describes BIOS that comes with the board. The topics covered in this chapter are as follows: Main Settings Advanced Settings Chipset Settings Security Settings ... -
Page 57: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. MPT-1000R User Manual... -
Page 58: Main Settings
4.3 Main Settings BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the data elements. System Time Set the time. Use the <Tab> key to switch between the data elements. MPT-1000R User Manual... -
Page 59: Advanced Settings
Enables or disables the System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some OS. ACPI Sleep State Selects ACPI sleep state that the system will enter when the SUSPEND button is pressed. MPT-1000R User Manual... - Page 60 4.4.2 Super IO Configuration BIOS Setting Description Serial Port Configuration Sets Parameters of Serial Ports. You can enable / disable the serial port and select an optimal settings for the Super IO device. Serial Port 1 Configuration MPT-1000R User Manual...
- Page 61 BIOS Setup Serial Port 2 Configuration Serial Port 3 Configuration Serial Port 4 Configuration MPT-1000R User Manual...
- Page 62 Hardware Monitor BIOS Setting Description Temperatures / Voltages These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status MPT-1000R User Manual...
- Page 63 BIOS Setup 4.4.4 CPU Configuration BIOS Setting Description Socket 0 CPU Information Displays the specific socket CPU Information. MPT-1000R User Manual...
- Page 64 The maximum time the device will take before it properly reports itself to the Host Controller. Device power-up delay “Auto” uses default value for a Root port it is 100ms. But for a Hub port, the delay is taken from Hub descriptor. MPT-1000R User Manual...
- Page 65 Controls the execution of UEFI and Legacy PXE OpROM. 4.4.7 Power Configuration BIOS Setting Description USB 2.0 Port 1 Power Configure USB 2.0 port 1 power USB 2.0 Other Ports Power Configure USB 2.0 other ports power MPT-1000R User Manual...
-
Page 66: Chipset Settings
4.5 Chipset Settings BIOS Setting Description HD-Audio Configuration HD-Audio Configuration Settings PCI Express Configuration PCI Express Configuration Settings Selects the SATA Device Configuration Setup SATA Drivers options USB Configuration USB Configuration Settings HD-Audio Configuration MPT-1000R User Manual... - Page 67 Enables or Disables the Chipset SATA controller. The Chipset SATA controller supports the 2 black internal SATA ports (up to 3Gb/s supported /port). SATA Mode Selection Determines hos SATA controller(s) operate. L1 Substates PCI Express L1 Substates settings. MPT-1000R User Manual...
- Page 68 Device Connection to the controller. XDCI Support Enable/Disable XDCI XHCI Disable Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to Compliance Mode disable Compliance Mode. MPT-1000R User Manual...
-
Page 69: Security Settings
This section allows you to configure, improve your system, and set up some system features according to your preference. BIOS Setting Description Administrator Password Sets an administrator password for the setup utility. User Password Sets a user password. Secure Boot Configures Secure Boot. MPT-1000R User Manual... - Page 70 Forces system to user mode. Configure NVRAM to Keys contain OEM-defined factory default Secure Boot keys. Reset to Setup Delete NVRAM content of all UEFI Secure Boot key Mode databases Enables expert users to modify Secure Boot Policy Management variables without full authentication. MPT-1000R User Manual...
-
Page 71: Boot Settings
65535 (0xFFFF) means indefinite waiting. Bootup NumLock State Selects the keyboard NumLock state. Quiet Boot Enables / Disables Quiet Boot option. Boot mode select Select boot mode LEGACY/UEFI Boot Option Priorities Sets the system boot order. MPT-1000R User Manual... -
Page 72: Save & Exit Settings
Restore Defaults Restores / Loads defaults values for all the setup options. Save as User Defaults Saves the changes done so far as user defaults. Restore User Defaults Restores the user defaults to all the setup options. MPT-1000R User Manual... -
Page 73: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. I/O Port Address Map Interrupt Request Lines (IRQ) Watchdog Timer Configuration... -
Page 74: I/O Port Address Map
0x00000600-0x0000061F Motherboard resources 0x0000164E-0x0000164F Motherboard resources 0x0000E000-0x0000EFFF PCI-to-PCI Bridge 0x000003F8-0x000003FF Communications Port (COM1) 0x000002F8-0x000002FF Communications Port (COM2) 0x000003E8-0x000003EF Communications Port (COM3) 0x000002E8-0x000002EF Communications Port (COM4) 0x000002E0-0x000002E7 Communications Port (COM5) 0x0000F000-0x0000F03F Intel(R) HD Graphics 505 0x0000C000-0x0000CFFF PCI-to-PCI Bridge MPT-1000R User Manual... - Page 75 Standard SATA AHCI Controller 0x0000F060-0x0000F07F Standard SATA AHCI Controller 0x00000000-0x0000006F PCI Express Root Complex 0x00000078-0x00000CF7 PCI Express Root Complex 0x00000D00-0x0000FFFF PCI Express Root Complex 0x0000F040-0x0000F05F SM Bus Controller 0x0000D000-0x0000DFFF PCI-to-PCI Bridge 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer MPT-1000R User Manual...
-
Page 76: Interrupt Request Lines (Irq)
Intel(R) Serial IO GPIO Host Controller - INT3452 IRQ 14 Intel(R) Serial IO GPIO Host Controller - INT3452 IRQ 27 Intel(R) Serial IO I2C Host Controller - 5AAC IRQ 4294967293 Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) IRQ 0 System timer MPT-1000R User Manual... -
Page 77: Watchdog Timer Configuration
Fintek 81966, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else MPT-1000R User Manual... - Page 78 //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81966_LD(0x07); //switch to logic device 7 bBuf = Get_F81966_Reg(0xF0); bBuf &= ~0x80; Set_F81966_Reg(0xF0, bBuf); //disable WDTO output bBuf = Get_F81966_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81966_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- MPT-1000R User Manual...
- Page 79 Init_Finish; } F81966_BASE = 0x00; result = F81966_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81966 (void) outportb(F81966_INDEX_PORT, F81966_UNLOCK); outportb(F81966_INDEX_PORT, F81966_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81966 (void) outportb(F81966_INDEX_PORT, F81966_LOCK); //--------------------------------------------------------------------------- void Set_F81966_LD( unsigned char LD) Unlock_F81966(); outportb(F81966_INDEX_PORT, F81966_REG_LD); outportb(F81966_DATA_PORT, LD); Lock_F81966(); MPT-1000R User Manual...
- Page 80 //--------------------------------------------------------------------------- #defineF81966_INDEX_PORT (F81966_BASE) #defineF81966_DATA_PORT (F81966_BASE+1) //--------------------------------------------------------------------------- #defineF81966_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81966_UNLOCK 0x87 #defineF81966_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81966(void); void Set_F81966_LD( unsigned char); void Set_F81966_Reg( unsigned char, unsigned char); unsigned char Get_F81966_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81966_H MPT-1000R User Manual...
Need help?
Do you have a question about the MPT-1000R and is the answer not in the manual?
Questions and answers