Connecting The System To Power - Bose Lifestyle 18 Series I Installation Manual

System Installation

Connecting the system to power

Figure 16
Power connection of the
Acoustimass module
Figure 17
Power connection of the
media center
18
Connect the two AC power (mains) cords in the following order:
1. Plug the small end of the Acoustimass
connector panel of the Acoustimass module (Figure 16). Plug the other end of the power
cord into an AC (mains) outlet.
2. Turn the Acoustimass module POWER switch to on ( l ).
Power supply
CAUTION: For dual voltage units, make sure the voltage setting on the bottom of the media
center power supply matches the local power rating. Check with local electrical authorities if
you are not sure about appropriate power rating.
Plug the small round connector of the media center power supply cable into the DC POWER
jack on the back of the media center (Figure 17). Insert the power supply line cord connector
into the power supply and plug the cord into an AC (mains) outlet.
® module power cord into the AC power jack on the
Connector panel
Power switch
DC power jack
Rear panel