Connecting The System To Power - Bose LIFESTYLE 18 II Series Quick Setup Manual

Connecting the system
to
power
)
Note: Bose recommends using
a
quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be pur-
chased at electronics stores.
Connect the two AC power (mains) cords in the following order:
1. Plug the small end of the Acoustimass® module power cord into the AC power jack on
the connector panel of the Acoustimass module (Figure 14).
2. Plug the other end of the power cord into an AC (mains) outlet.
3. Turn the Acoustimass module POWER switch to on.
Figure 14
Power connection for
the Acoustimass module
Acoustimass module
connector panel
Power switch
I=ON
O=OFF
) Note: For dual voltage units (sold in certain areas), make sure the voltage setting on the bot-
tom of the media center power supply matches the local power rating (Figure 15). Check with
local electrical authorities if you are not sure of the appropriate power rating.
19