FlexiDome2X IP Camera
5
Installation
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
5.1
Disassembly
5.1.1
Surface mount version
The camera/housing unit consists of the following parts:
1.
2.
3.
4.
5.
To disassemble the unit proceed as follows:
1.
Bosch Security Systems
Surface mount box
Camera module and mounting base
Inner liner (with sealing ring)
Dome
Trim ring
Using the special screwdriver bit, loosen the three tamper-
resistant screws in the trim ring (the screws remain in
place).
Installation and Operation Manual
Installation | en
AR18-10-B006 | v1.1 | 2010.06
27