Mounting The Unit - Bosch NDN-498V03-21P Installation And Operation Manual

FlexiDome2X IP Camera
5.2

Mounting the unit

There are several ways to mount the unit. The method of
mounting depends on the type of surface and whether other
mounting hardware, such as an electrical box, a surface box or
other accessories are used.
Note:
If the unit is to be surface mounted, then use the Surface Mount
Box (SMB). The SMB is sold as a separate item (VDA-455SMB)
but the inner plastic cover should be removed as it is only
needed for analog cameras.
Certain versions of the FlexiDome are supplied with the Surface
Mount Box already included; please check the ordering number.
Other mounting accessories are also sold separately.
Refer to the dimensions drawing to find the exact position of
the screw holes and the entry hole for the wires. Use the
surface mount box as a template for surface installation; use
the paper template for flush installation.
Bosch Security Systems Installation and Operation Manual
Installation | en
AR18-10-B006 | v1.1 | 2010.06
29