Asus GigaX1116i+ User Manual page 60

GigaX Series L2 Smart Plus Switch User Manual
[Debug Write Register]
Write value to register address.
<block>: Block identifier, 0-7 or 0x0-0x7.
<subblock>: Sub block identifier: 0-15 or 0x0-0xf.
<address>: Register address within block, 0-255 or 0x00-0xff.
<value>: Register value, 0-4294967295 or 0x00000000-0xffffffff.
CLI command: Debug Write Register <block> <subblock> <address> <value>
[Debug PHY Read]
Read PHY register for port.
<portlist>: Port list.
[<address>]: Register address, 0-31 or 0x00-0x1f (default: Read all registers).
CLI command: Debug PHY Read <portlist> [<address>]
[Debug PHY Write]
Write value to PHY register for port.
<portlist>: Port list.
<address>: Register address, 0-31 or 0x00-0x1f.
<value>: Register value to write, 0-65535 or 0x0000-0xffff.
CLI command: Debug PHY Write <portlist> <address> <value>
[Monitor Show]
Show hardware Temperature, Fan speed, Voltage.
CLI command: monitor show
[Debug Loopback]
Perform internal or external loopback test.
[int|ext]: Internal or external loopback (default: Internal).
CLI command: Debug Loopback [int|ext]
52