Filter - Asus GigaX1116i+ User Manual

4.3.12 Filter

The function filters source IP only. Users can change the source IP filter
configuration in the following fields:
• Mode: Select "Disabled" to allow all IP addresses. Select "Manually" to allow
only the configured IP addresses.
• IP Address and IP Mask: When "Manually" mode is selected, these are the
IP addresses allowed.
Click on the Apply button to make the configuration effective, or the Refresh
button to refresh the setting to current value as shown in Figure 28.
GigaX Series L2 Smart Plus Switch User Manual
Figure 28. Filter Configuration
29