Asus GigaX1116i+ User Manual page 53

[Rstp Version]]
Set or show the RSTP protocol version to use.
[<version>]: normal - use RSTP, compat - compatible with old STP
CLI command : Rstp version [normal|compat]
[Rstp Mode]
Enable or disable the rstp protocol on ports <portlist>.
[<portlist>]: Port list (Default: All ports).
[enable|disable]: Enable or disable.
CLI command : Rstp Mode [<portlist>] [enable|disable]
[Rstp Aggr]
Enable or disable the RSTP protocol on aggregated links.
[enable|disable]: Enable or disable.
CLI command : Rstp aggr [enable|disable]
[Rstp Edge]
Expect the port to be an edge port (an end station) or a link to another STP device.
[enable|disable]: End-station or bridge.
CLI command : Rstp edge [enable|disable]
[Rstp Pathcost]
Set the rstp pathcost on ports <portlist>.
[<portlist>]: Port list (Default: All ports).
[<pathcost>]: Number between 1 - 200000000. Auto means autogenerated
pathcost
CLI command : Rstp pathcost [<portlist>] [<pathcost>|auto]
[Rstp Mcheck]
Force a recheck of the RSTP protocol on the ports in <portlist>.
<portlist>: List of ports.
CLI command : Rstp mcheck <portlist>
GigaX Series L2 Smart Plus Switch User Manual
45