GigaX Series L2 Smart Plus Switch User Manual
4.3.13 Rate Limit
Users can change the rate limit configuration in the following fields:
• ICMP Rate: Select the limited rate of ICMP frames.
• Broadcast Rate: Select the limited rate of broadcast frames.
• Multicast Rate: Select the limited rate of multicast frames.
• Flooded Unicast Rate: Select the limited rate of flooded unicast frames.
• Policer: Control maximum ingress bandwidth rate.
• Shaper: Control maximum egress bandwidth rate.
Click on the Apply button to make the configuration effective, or the Refresh
button to refresh the setting to current value as shown in Figure 29.
30
Figure 29. Rate Limit Configuration