Loading Documents; Using The Adf; Using The Scanner Glass - Brother MFC-795CW User Manual

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m ) paper and always fan the pages
before putting them in the ADF.
Recommended environment
68 to 86 °F (20 to 30 °C)
Temperature:
Humidity: 50% to 70%
Paper:
20 lb LTR (80 g/m
Document Sizes Supported
Length: 5.8 to 14 in. (148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m
How to load documents
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or liquid
correction fluid are completely dry.
2
a
b
c
2
d
2
2
A4)
2
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
2
)
jam.
2

Using the scanner glass

You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length:
Width:
Weight:
Loading paper and documents
Unfold the ADF Document Output
Support Flap (1).
Fan the pages well.
Adjust the paper guides to fit the width of
your document.
Make sure you place your document,
face down, top edge first in the ADF
underneath the guides (2) until you feel
it touch the feed rollers and the LCD
screen shows ADF Ready.
2
IMPORTANT
Up to 11.7 in. (297 mm)
Up to 8.5 in. (215.9 mm)
Up to 4.4 lb (2 kg)
2
1
2
2
21