External And Extension Telephones; Connecting An External Or Extension Telephone; Using External And Extension Telephones - Brother MFC-795CW User Manual

Chapter 7
External and extension
telephones
Connecting an external or
extension telephone
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
Connect the telephone line cord to the jack
labeled EXT.
Before you connect an external telephone,
remove the protective cap (3) from the EXT.
jack on the machine.
3
1 Extension telephone
2 External telephone
3 Protective Cap
When you are using an external or extension
telephone, the LCD shows
Ext. Tel in Use.
70
Using external and extension
telephones
7
Using extension telephones
If you answer a fax call on an extension
7
telephone, you can make your machine
receive the fax by pressing the Fax Receive
Code l 5 1.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code # 5 1 to take the
call at an extension telephone. (See F/T Ring
Time (Fax/Tel mode only) on page 47.)
Using an external telephone
(connected to the EXT. jack of the
machine)
1
If you answer a fax call at the external
telephone connected to the EXT jack of the
machine, you can make the machine receive
2 the fax by pressing Speaker Phone followed
by Black Start, and then pressing Receive.
If you answer a call and no one is on
the line:
You should assume that you're receiving a
manual fax.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 48.)
7
7
7
7