Tools Needed; Materials Needed - Bosch SRV53C13UC Use And Care Manual

TOOLS NEEDED

Hammer
Tape Measure
Wire Cutter

MATERIALS NEEDED

(Additional materials may be required to comply with local codes.)
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper
conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher
supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
Teflon brand tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief. Although a strain relief is included on the
junction box, a separate strain relief may be required if you attach the field wiring
directly to the terminal block.
2
Tools and Materials Needed
Hole Saw
Slot Screwdriver
Wire Stripper
Pipe Wrench
Phillips Screwdriver
Drill
Adjustable Wrench
T-20 Screwdriver
Level