Tools And Materials Needed - Bosch SHXM78W54N Installation Instructions Manual

Adjustable Wrench
Wire Cutter
Phillips Screwdriver
4

Tools and Materials Needed

Drill
Wire Stripper
Slot Screwdriver
90° elbow with 3/4" N.P.T. female threads on one leg, and
sized to fit your water supply line (copper tubing/
compression fitting, or braided hose) on the other leg.
Electrical Supply Cable - Minimum #14 AWG, 2 conductor,
1 ground, insulated copper conductors rated 75°C or higher
Hot Water Supply Line - Minimum
or metal braided dishwasher supply line
Shut-off valve and fittings appropriate for hot water supply
line (copper tubing/compression fitting, or braided hose
UL listed conduit connector or strain relief is required if you
attach the field wiring directly to the terminal bloc
Hole Saw
Pliers
Needle Nose Pliers
/ " O.D. copper tubing
3
8
Tape Measure
Level