Bosch SRV53C13UC Use And Care Manual page 73

Rubber Drain Hose Adaptor
(cross section)
Raised Rib
Connects to
household plumbing
Figure 12
Raised
Rib on
Outside
of Drain
Hose
Adaptor
10
Dishwasher
Drain Hose
Insert until drain
hose locks in place
Spring
Clamp
Screw
Clamp
Figure 13
Plumbing
Installation of the Rubber Drain Hose
Adaptor
1 Obtain the Rubber Drain Hose Adaptor and the two
hose clamps from the Dishwasher Installation Kit (do
not substitute).
2 On one outside end of the Rubber Drain Hose Adapter
is a raised rib. Insert the dishwasher drain hose into
the end without the raised rib (see Figure 12). Be
sure to fully insert the drain hose.
3 Secure the connection with the Spring Clamp (see
Figure 13).
4 Use the Screw Clamp to attach the Rubber Drain Hose
Adaptor to the house plumbing (see Figure 13).