Preparing And Loading The Dishware; Loading The Top Rack - Bosch SRV53C13UC Use And Care Manual

Preparing and Loading the Dishware

Loading the Top Rack

Figure 1 shows a typical mixed load for the top
rack.
9 place setting
RACKMATIC™ Top Rack Height Adjustment
The top rack can be lowered to accommodate
large items in the top rack, and raised to make
room for large items in the bottom rack.
To lower the top rack:
1. Pull the top
rack out of
the
dishwasher
until it stops
rolling.
2. Press the
RACKMATIC™
handles
inward
as shown in
Figure 2
and let the rack drop.
6
Figure 1
Figure 2
(continued)
To raise the top rack:
1. Pull the top rack out of the dishwasher until it
stops rolling.
2. Grasp the top of the rack above the
RACKMATIC™ handles and pull it upward as
shown in Figure 3
until the
RACKMATIC™
handles lock
the rack into
position (you
do not need to
press the
RACKMATIC™
handles in
order raise
the rack).
NOTE: Before you push the top rack back
into the dishwasher, ensure that the rack
height is the same on both sides. Otherwise,
the dishwasher door will not shut and the top
rack spray arm will not connect to the water
circuit.
3. Push the top rack back into the dishwasher.
Cup Shelf
In addition to cups, the cup shelf can also hold
large utensils.
Grasp the cup shelf as shown in Figure 4 and
fold it down.
Place cups upside-down on the cup shelf.
Figure 3
Figure 4