Security Information - Siemens SIPART PS100 Compact Operating Instructions

Example of explosion protection nameplate
①
②
2.7

Security information

Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary
to implement – and continuously maintain – a holistic, state-of-the-art industrial security
concept. Siemens' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected to
an enterprise network or the internet if and to the extent such a connection is necessary and only
when appropriate security measures (e.g. firewalls and/or network segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are no longer
supported, and failure to apply the latest updates may increase customer's exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed
under
https://www.siemens.com/industrialsecurity.
SIPART PS100
Compact Operating Instructions, 05/2021, A5E50188940-AA
For technical data and temperature classes, see certificate / Operating instructions
TÜV 20 ATEX 264014 X / IECEx TUN 20.0005 X
II2G Ex ia IIC T4 Gb
II3G Ex ic IIC T4 Gc
II3G Ex ec IIC T4 Gc
II2D Ex tb IIIC T100°C Db
- /
FM21US0001X
/ Ta20K
For installations in U.S.A. and Canada:
Install per control drawing A5E50264877A Rev.01
-20°C
CSA21CA80043203X Ta ≤
≥
Approvals
ATEX/IECEx marking for hazardous area
1Ex ia IIC T4 Gb Cl I Zn 1 AEx ia IIC T4 Gb
2Ex ic IIC T4 Gc -
2Ex e IIC T4 Gc Cl I Zn 2 AEx ec IIC T4 Gc
Ex tb IIIC T100°C Db Zn 21 AEx tb IIIC T100°C Db
/
/
+80°C (T4)
③
④
2.7 Security information
-
IS Cl I Div 1, 2 Gp A-D
-
NI Cl I Div 2 Gp A-D
DIP Cl II, III Div 1 Gp E-G
20-xxxxx-xxxxX GYJ21.1097X
-
FM/CSA marking for hazardous area
Permissible ambient temperature for oper‐
ation in hazardous areas
Introduction
9