Installing/mounting
4.3 Mounting to part-turn actuator
8. Tighten the carrier
Figure 4-9
9. Place the positioner and the mount on the actuator carefully. One of the two pins
coupling wheel
Figure 4-10
When using the stainless steel coupling (article number TGX: 16300-1556): Place the
positioner and the mount on the actuator carefully. Place the stainless steel coupling on the
actuator shaft.
22
②
using the cylinder head screw
Carrier
①
must fit in the carrier
Orientation of mount
⑦
and the washer
②
when you do this.
Compact Operating Instructions, 05/2021, A5E50188940-AA
⑧
.
⑫
of the
SIPART PS100