Advertisement
Quick Links
Features
• Transformer-isolated line level input
• Gain/Trim control
• Bass and treble
• Audio Gating
• Gating with threshold and duration adjustments
• Variable signal ducking when muted
• Fade back from mute
• 4 levels of available priority
• Can be muted from higher priority modules
• Can mute lower priority modules
• Pluggable screw terminal strip
TBL1S
Transformer Balanced
Line Input Module
Printed in Taiwan.
© 2007 Bogen Communications, Inc.
54-2084-01D 0704
Specifications subject to change without notice.
Advertisement
Related Manuals for Bogen TBL1S
Summary of Contents for Bogen TBL1S
- Page 1 • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules • Pluggable screw terminal strip Printed in Taiwan. © 2007 Bogen Communications, Inc. 54-2084-01D 0704 Specifications subject to change without notice.
- Page 2 Module Installation 1. Turn off all power to the unit. Make all necessary jumper selections. Position module in front of any desired module bay opening, making sure that the module is right-side up. Slide module on to card guide rails. Make sure that both the top and bottom guides are engaged.
- Page 3 "+" terminal. Since unbalanced connections do not provide the same amount of noise immunity that a balanced connection does, the connection distances should be made as short as possible. 50 Spring Street, Ramsey, NJ 07446, U.S.A. GATE ENABLE/ DISABLE 201-934-8500; Fax: 201-934-9832 www.bogen.com ASSIGNMENT BUS A BUS B...
Need help?
Do you have a question about the TBL1S and is the answer not in the manual?
Questions and answers