Table of Contents
Advertisement
5. Adjust the 5 slide switches for the requirements
of your site
.
Default recommendations have been selected to expedite the
process.
a.
Anti-passback: Leave off if you do not intend to restrict
users from sharing their card credentials with other people
to gain entry.
b.
Only encrypted remote controls: Turn on to get the
best performance of 2 button transmitters, if used.
c.
Summer/Winter Europe or Summer/Winter USA/
Canada: Turn on only if your area is using daylight savings
time.
d.
Facility code Management: Turn on if you will be
monitoring regularly the event reports.
i.
If you turn on this feature, you must enter a value
for the facility code that is being used on your card
credentials. (1 to 255 if using 26-bit Wiegand cards.)
6. Scheduling:
A pop up message will appear, "Do you want to configure a
schedule now?" Click Yes to proceed to the Time table
a
. You can rename the default name 'STANDARD' to M-F
as an example or something relatable to your facility
configuration.
CV-603 MPROXBLE CONTROLLER / CV-603PS-K1 MPROXBLE CONTROLLER CABINET KIT
INSTA LL AT ION I NSTRUCTIONS INSTA LL AT ION INS T RUCT IONS
b.
Click on the ALL label underlined in red to select one
of the three views; ALL, Monday to Sunday or Monday to
Friday/Weekend.
c.
Click on the time to alter the time slots T1 to T4 per
period.
d.
To save your settings,
click on VALIDATE icon
at the bottom. (Android
app). Click on DONE icon
(iOS app).
On iOS Devices
Tap the time you wish to adjust and the time will appear on
the bottom of the screen. Scroll the hours and minutes for the
time preferred. To save the new values, tap on the DONE icon.
7. Relay Configuration:
There are three standard modes for the relays;
(i)
Momentary, 2 seconds on then off
(ii)
Timed, a period defined in hours, minutes, and
seconds.
(iii)
Bistable or latched, the relay toggles on or off.
Depending on the type of mode, secondary selections
will appear.
Page 15 of 20
Advertisement
Table of Contents
