Vestil CYL-D-1-PN Instruction Manual

Vestil CYL-D-1-PN Instruction Manual

Cylinder dollies

Advertisement

CYL-D-1-PN & CYL-D-1-HR C
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves
the packaging and maintains the orientation of the product in the packaging; then inspect the
product closely to determine whether it sustained damage during transport. If damage is
discovered during the inspection, immediately record a complete description of the
damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location
where the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing
to apply either: a) Instructions in this manual; or b) Information provided on labels affixed to the
product. Neither is Vestil responsible for any consequential damages sustained as a result of
failing to exercise sound judgment while assembling, installing, using or maintaining this product.

Table of Contents

Hazard identification: explanation of signal words...................................................... 2
Safety Guidelines................................................................................................ 2
FIG. 1: CYL-D-1-PN exploded parts diagram & bill of materials......................................... 3
FIG. 2: CYL-D-1-HR exploded parts diagram & bill of materials.................................... 4
Use instructions.................................................................................................. 5
Inspections and Maintenance................................................................................ 5
Label placement diagram..................................................................................... 6
Limited warranty................................................................................................. 7
Rev. 5/6/2013
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
I
NSTRUCTION
Copyright 2013 Vestil Manufacturing Corp.
V
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
www.vestilmfg.com
YLINDER
M
ANUAL
CYL-D-1-PN, Manual.doc
C
ORP
e-mail:
sales@vestil.com
D
OLLIES
Page 1 of 7
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CYL-D-1-PN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil CYL-D-1-PN

  • Page 1: Table Of Contents

    2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) Information provided on labels affixed to the product.
  • Page 2: Hazard Identification: Explanation Of Signal Words

    SAFETY GUIDELINES Vestil diligently strives to identify foreseeable hazards associated with the use of its products. However, no manual can address every conceivable risk. The end-user ultimately is responsible for exercising sound judgment at all times.
  • Page 3 Rev. 5/6/2013 CYL-D-1-PN, Manual.doc FIG. 1: CYL-D-1-PN exploded parts diagram & bill of materials Item Part no. Description Quantity 16-132-199 10in. x 3½in. pneumatic wheel for in. axle 65026 in. x 1 in. zinc-plated cotter pin 44-145-004 in. x 24in. chain 11005 in.
  • Page 4 – 20 zinc-plated hex nut 16-525-021 Handle weldment 16-514-139 Base and support gusset weldment 16-112-019 Axle 13-025-023 in. (inner diameter) red handle grip 37018 in. – 20 UNC zinc-plated nylock nut Copyright 2013 Vestil Manufacturing Corp. Page 4 of 7...
  • Page 5: Use Instructions

    Check the hardware that fastens the handle to the frame. The connection should not be loose.  Tighten the fasteners if necessary. Check the overall structure of the dolly. The frame should be rigid and square.  Copyright 2013 Vestil Manufacturing Corp. Page 5 of 7...
  • Page 6: Label Placement Diagram

    Rev. 5/6/2013 CYL-D-1-PN, Manual.doc Label placement diagram: The dolly is labeled as shown below. Copyright 2013 Vestil Manufacturing Corp. Page 6 of 7...
  • Page 7: Limited Warranty

    (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.

This manual is also suitable for:

Cyl-d-1-hr

Table of Contents