Related Manuals for Vestil CART-1000-DC
Summary of Contents for Vestil CART-1000-DC
- Page 1 Instruction Manual Instruction Manual Instruction Manual Instruction Manual ELECTRIC LIFT TABLE Model:CART-1000-DC Note: Owner/Operator must read and understand this instruction manual before using the lift table.
- Page 2 ELECTRIC LIFT TABLE Model CART-1000-DC Instruction Manual READ THIS OPERATION MANUAL COMPLETELY BEFORE USING.THOROUGHLY UNDERSTAND AND FOLLOW ALL SAFETY INSTRUCTIONS.IF THIS IS LOST, PLEASE CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY.IF THE WARNING/CAUTION DECAL ON THE UNIT IS LOST, PLEASE CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY.
-
Page 3: Daily Inspection
2. CAUTION Hazard or unsafe practice which, if not avoided, may result in MINOR or MODERATE PERSONAL INJURY and PROPERTY DAMAGE. READ THE OPERATION MANUAL COMPLETELY BEFORE USING AND THOROUGHLY UNDERSTAND AND FOLLOW ALL SAFETY INSTRUCTIONS. This lifter is designed to use with stable uniform load on a solid lever floor. DO NOT use the lifter for any other purpose than its intended use. - Page 4 4. NAME OF PARTS CART-1000-DC 1.Handle 4.Platform 2.Switch 5. Link 3.Brake Pedal 6.Guide rail...
-
Page 5: Operating Lift Table
5. OPERATING LIFT TABLE How to use the brake. CAUTION Brake lift table when not moving it in order to prevent sudden movement. The brake is equipped with the swivel caster on the right side. (1) Braking the wheel, press the brake pedal. (2) Releasing the brake, lift up the brake pedal. -
Page 6: Charging The Battery
Tighten joint again or Replace valid. seal. Oil leakage from air breather. Excessive quantity of oil. Reduce oil quantity. 12. SPECIFICATIONS Model CART-1000-DC Capacity (lbs) 1000 Table (in) 20 ½×39 ¾ Min. table height (in) 17 ½ Max. table height (in) 37 ½... - Page 7 Motor (KW) Work cycle of hydraulic power pack Approx. numbers of lifting at full charge and with full load (times) Approx. time required to lift up table.(sec) Wheel (in, diameter) Handle height (in) 56 ½ Weight (lbs) 13. HYDRAULIC CIRCUIT/WIRING DIAGRAM...
- Page 8 Vestil Manufacturing 2999 N. Wayne St.; Angola, IN 46703 800-348-0868 PART NUMBER DESCRIPTION QTY. C-1000-DC-08-CYL ASSEMBLY, CYLINDER C-1000-DC-08-RC ASSEMBLY, RIGID CASTER C-1000-DC-08-SC ASSEMBLY, SWIVEL CASTER C-1000-DC-08-SK KIT, SEAL BRK- C-1000-DC-BRK-CLIP CLIP, BRAKE (REPLACEMENT) CLIP CART-1000-DC-LVC VALVE, LOWERING W/ COIL C-1000-DC-08-1...
- Page 9 C-1000-DC-08-61 ASSEMBLY, PUMP C-1000-DC-08-62 HARNESS, HAND CONTROL WIRE C-1000-DC-08-63 ASSEMBLY, HAND CONTROL C-1000-DC-08-64 HANDLE C-1000-DC-08-65 NUT, NYLON LOCK - M5 C-1000-DC-08-66 BOLT, HEX HEAD C-1000-DC-08-67 COVER, BATTERY BOX C-1000-DC-08-68 NUT, HEX - M8 C-1000-DC-08-69 WASHER, LOCK - M8 C-1000-DC-08-70 WASHER, FLAT C-1000-DC-08-71 WASHER, LOCK - M12 C-1000-DC-08-72...