Vestil CTD-H-TP-3000 Instruction Manual

Vestil CTD-H-TP-3000 Instruction Manual

Hydraulic crate dumper

Advertisement

Quick Links

Operator's Manual
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product to determine whether it sustained
damage during transport. If damage is discovered, record a complete description of it on the bill of lading and file a claim
with the carrier immediately! If the product is undamaged, discard the packaging.
NOTE:
The end user is solely responsible for confirming that product design, use, and maintenance comply with laws,
regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
If you have questions that are not addressed in these instructions, or to order replacement parts, labels, and
accessories, call (260) 665-7586 and ask for the Service and Parts Department. You can also reach Service and Parts
online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals:
Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-manuals.php.
Table of Contents
A company dedicated to solving loading dock and material handling
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free: (800) 348-0868
CTD-H-TP-3000 Hydraulic Crate Dumper
Instruction Manual
Copyright 2021, Vestil Manufacturing Corp.
4/16/21
Vestil Manufacturing Corp.
problems since 1955.
Fax: (260) 665-1339
http://www.vestil.com/ email: info@vestil.com
CTD-H-TP-3000 MANUAL.DOCX
Page 1 of 14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTD-H-TP-3000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil CTD-H-TP-3000

  • Page 1 (260) 665-7586 and ask for the Service and Parts Department. You can also reach Service and Parts online at https://www.vestil.com/page-parts-request.php. Electronic Copies of Instruction Manuals: Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-manuals.php. Table of Contents Copyright 2021, Vestil Manufacturing Corp.
  • Page 2: Table Of Contents

    HAZARDS Vestil Manufacturing diligently strives to identify all foreseeable hazards associated with the use of its products. However, material handling is inherently dangerous and no manual can address every risk. The end user is ultimately responsible for exercising sound judgment at all times in the use of this product.
  • Page 3  DO NOT modify the crate dumper in any way. Unauthorized modifications automatically void the limited warranty (see 13) and may make the product unsafe to use. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 3 of 14...
  • Page 4: National Standards

    Part II:For the User. If instructions provided in this manual conflict with the Standard, then the Standard takes precedence over this Manual. Vestil requests you immediately share any conflict between this Manual and the Standard with its TECHNICAL SERVICE personnel. Contact information appears on the cover page of this Manual.
  • Page 5 Minimum clearance B 3” (76 mm) Maximum center C* 6 1/2” (165 mm) * Center support C may be omitted from container. CTD-H-TP-3000 exploded parts diagram and bill of materials. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 5 of 14...
  • Page 6 3/16 x 1 1/4 SCREW BLACK OXIDE ACCESSORIES, Ø3/4 - 16, HEX JAM NUT, ZINC 36266 15-034-028 ELECTRICAL, SHRINK PLATED WRAP SPECIALTY HARDWARE, 14-612-001 PIN, LOCK, WELDMENT 15-145-018 Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 6 of 14...
  • Page 7: Major Components

    The diagram identifies components for installation and use of the crate dumper. INSTALLATION INSTRUCTIONS While the CTD-H-TP-3000 crate dumper comes fully assembled from the factory, it is necessary for the customer to connect the unit to the fork truck hydraulic system.
  • Page 8: Record Of Satisfactory Condition

    Adjust the top retainer to the next larger height increment than H. Re-insert the cotter pins. DO NOT use the crate dumper without both cotter pins being in place. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 8 of 14...
  • Page 9 Do not allow a rotated container to support the weight of the crate dumper. Return a container to level before transporting it to another location. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 9 of 14...
  • Page 10: Load Composition (Weight And Balance)

    NATIONAL STANDARDS section on 4, you must acquire a copy of the most recent revision of the Standard. Apply all use and maintenance/care instructions in the Standard. Vestil also recommends that you contact your local occupational Table of Contents Copyright 2021, Vestil Manufacturing Corp.
  • Page 11 2. Raise the fork truck tines to allow rotation. Rotate the crate dumper platform forward to an angle of approximately 45°. 3. Position a rigid stop to allow about ½”-1” of compression in the hydraulic cylinders. Some motion is necessary to expel air from the system. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 11 of 14...
  • Page 12 4. Hold a rag over one cylinder’s lower fitting. Use a wrench to loosen the fitting until oil and air starts sputtering out. Once no more air comes out, tighten the fitting. 5. Repeat this procedure for the other hydraulic cylinder. This section intentionally left blank. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 12 of 14...
  • Page 13: Labeling Diagram

    To order replacement labels, contact the technical service and parts department online at https://www.vestil.com/page- parts-request.php. Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the Parts Department. Table of Contents Copyright 2021, Vestil Manufacturing Corp. Page 13 of 14...
  • Page 14: Limited Warranty

    After Vestil receives your request for warranty service, an authorized representative will contact you to determine whether your claim is covered by the warranty. Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN.

Table of Contents