Vestil CH-200 Series Instruction Manual

Vestil CH-200 Series Instruction Manual

Block lifters

Advertisement

Quick Links

Rev. 4/26/2018
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Specifications......................................................................................................................... 2
Signal Words........................................................................................................................... 3
Hazards of Improper Use........................................................................................................... 3
Exploded View & Bill of Materials................................................................................................ 4
Using the Lifter........................................................................................................................ 5
Inspections & Maintenance....................................................................................................5 - 6
Labeling Diagram.............. ............................................................................................................ 6
Limited Warranty...................................................................................................................... 7
Copyright 2018 Vestil Manufacturing Co.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
CH-200 Series Block Lifters
Instruction Manual

Table of Contents

CH-200, MANUAL
Fax: (260) 665-1339
e-mail:
info@vestil.com
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CH-200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil CH-200 Series

  • Page 1: Table Of Contents

    Fax: (260) 665-1339 www.vestilmfg.com e-mail: info@vestil.com CH-200 Series Block Lifters Instruction Manual Receiving instructions: After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading.
  • Page 2: Specifications

    Overall headroom (top of bale opening to bottom of block support) = 33” (83.8cm) Adjustable lifting bale Usable bale opening = 1” x 2” (2.5x5.1)cm Net weight = 21.7 lb. (9.9kg) Copyright 2018 Vestil Manufacturing Co. Page 2 of 7...
  • Page 3: Signal Words

    Hazards of Improper Use: Vestil strives to identify all foreseeable hazards associated with the use of its products. However, material handling is dangerous and no manual can address every conceivable risk. The most effective means of preventing injury is for the end-user to apply sound judgment whenever using this device.
  • Page 4: Exploded View & Bill Of Materials

    Hex bolt, gr. A, zinc plated, ”-20 x 1 ” 37018 Lock nut, gr. 2, zinc finish, ”-20 49-053-001 Rubber mat, C-clamp lifter, 3 ” x 6” 49-053-002 Rubber mat, C-Clamp lifter 16-145-006 Wheel, hand wheel Copyright 2018 Vestil Manufacturing Co. Page 4 of 7...
  • Page 5: Using The Lifter

    Visually inspect the lifter for damage such as bends, severe wear, warps, cracks, or other deformations of the lifter body, lifting bale, or block clamping mechanism (wheel, clamp pad, clamp supporting arm). (Continued on p. 6) Copyright 2018 Vestil Manufacturing Co. Page 5 of 7...
  • Page 6: Labeling Diagram

    Vestil for replacements. A: Tag 993 (front side; attached to lifting bale opening with cable tie) A: Tag 993 (back side; attached to lifting bale opening with cable tie) B: Label 643 Copyright 2018 Vestil Manufacturing Co. Page 6 of 7...
  • Page 7: Limited Warranty

    The warranty period for original dynamic components is 30 days. For wearing parts, the warranty period is 30 days. Both warranty periods begin on the date Vestil ships the product to the Warrantee. If the product was purchased from an authorized distributor, the periods begin when the distributor ships the product.

This manual is also suitable for:

Ch-200-20Ch-200-30

Table of Contents