Franklin Electric VersaJet Series Owner's Manual

OWNER'S MANUAL
VersaJet Series Shallow Well Jet Pump
The VersaJet Series is designed for shallow well applications and is capable of raising water from a depth of
25 feet. All mechanical parts, motor, impeller, electrical controls, etc., are above ground within easy reach.
The VersaJet line is capable of a wide range of pres-
sures and flows, but this may require replacing the
standard factory installed jet nozzle with one of the
other provided nozzles.
This product is covered by a Limited Warranty for a
period of 24 months from the date of original purchase
by the consumer. For complete warranty information,
refer to www.FranklinWater.com.
Specifications
Pump Type
VersaJet Series
SAFETY INSTRUCTIONS
Before Getting Started
This equipment should be installed and serviced by technically qualified personnel who are familiar with
the correct selection and use of appropriate tools, equipment, and procedures. Failure to comply with
national and local electrical and plumbing codes and within Franklin Electric recommendations may result
in electrical shock or fire hazard, unsatisfactory performance, or equipment failure.
Know the product's application, limitations, and potential hazards. Read and follow instructions carefully to
avoid injury and property damage. Do not disassemble or repair unit unless described in this manual.
Failure to follow installation or operation procedures and all applicable codes may result in the following
hazards:
Risk of death, personal injury, or property damage due to explosion,
fire, or electric shock.
• Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc.
• Do not use in explosive atmospheres or hazardous locations as classified by the NEC, ANSI/NFPA70.
• Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface,
or in water.
• When a pump is in its application, do not touch the motor, pipes, or water until the unit is unplugged
or electrically disconnected.
• If the power disconnect is out of sight, lock it in the open position and tag it to prevent unexpected
application of power.
• If the disconnect panel is not accessible, contact the electric company to stop service.
Discharge Suction
1.00" 1.25"
HP Range
All
EN
English