Operation - Dimplex BLF7451 Owner's Manual

Operation

Figure 11
WARNING: This electric firebox
must be properly installed before it
is used.
The unit can be controlled by either
the manual controls which are located
on the upper right of the fireplace or
the remote (Figure 11 & 12).
The fireplace is supplied with an IR
multifunction remote control.
!
NOTE: To operate correctly, the
remote control must be pointed
towards the Floating Display
A. Standby
Turns the unit On and Off.
→ Activated by pressing the Standby
button on the remote or the unit.
• The unit will turn on with the same
functions that it was set to when
it was turned Off and the intake
temperature will be indicated on
the Floating Display
14
Floating
Display
TM
.
TM
.
TM
A C
D E
!
NOTE: When any button is
pressed the intake temperature
will be displayed on the Floating
Display
TM
B. Flame Effects
Turns the flame effect On and Off.
→ Activated by pressing the
button on the remote.
C. Heat ON/OFF
Turns the heater On and Off.
→ Activated by pressing the
button on the unit or the remote.
• Indicated by the
intake temperature being displayed
on the Floating Display
seconds before turning off.
!
NOTE: After the heater is
switched off, there is a 60 second
fan delay, where the fan will
F
Figure 12
A
B
D
F
for 5 seconds.
icon and the
, for 5
TM
www.dimplex.com
C
E
G
H