Dimplex BLF7451 Owner's Manual page 11

Fireplace Installation
5. Secure the wall bracket to the wall
using the supplied 1½ in. (3.8 cm)
mounting screws and washers
into the wall and/or wall anchors.
6. Install the bottom support bracket
to the wall centered with the
wall mounting bracket, using the
appropriate mounting hardware,
13 ¾" (350 mm) below the wall
mounting bracket. (Figure 5)
7. Remove the center screw from
the bottom of the fireplace.
(Figure 6)
8. Hang the fireplace from the
bracket.
9. Install the removed screw through
the bottom support bracket into
the fireplace.
10. Refer to Front Glass Installation
section final installation
procedures.
Figure 5
Figure 6
11