Heated Handlebar Grips - BMW F 800 GS Rider's Manual

Malfunctions
After removing the encoding
plug, refit the cover cap.
Press in locking mechanism 2
and remove protective cap 3.
Install coding plug 4.
NOTICE
The coding plug and/or the pro-
tective cap are stored in the seat
bench together with the vehicle
tools.
The locking mechanism 2 en-
gages.
Install rubber band 1.
Switch on the ignition.
NOTICE
If the coding plug is connected,
deactivated riding safety systems
remain deactivated even after the
ignition is turned off and on.
Symbol for coding plug is
displayed.
Setting riding mode (
Install seat ( 50).

Heated handlebar grips

with heated handlebar grips
Operating heated grips
Starting engine ( 73).
NOTICE
The heated grips option can only
be activated when the engine is
running.
NOTICE
The increase in power
consumption caused by the
heated grips can drain the
battery if you are riding at low
engine speeds. If the battery is
inadequately charged, the heated
grips are switched off to ensure
starting capability.
47).
OE
Press button 1 repeatedly un-
til desired heating level 2 is
shown.
The handlebar grips can be
heated at two different levels.
The second level is used for fast
4
49
z