BMW F 800 GS Rider's Manual page 113

Installing rear wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Roll rear wheel into swing arm
while guiding brake rotor be-
tween brake pads.
Roll rear wheel as far forward
as possible and lay chain 8 on
chain sprocket.
Mount left-hand adjusting
plate 7 in swing arm and install
quick-release axle 6 in brake
caliper and rear wheel.
Make sure that axle fits in
cutout of adjusting plate.
9
111
z