BMW F 800 GS Rider's Manual page 119

Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective light source.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with LED turn indicators
LED
To protect glass on new bulb
against contamination, always
use a clean, dry cloth to hold it;
do not touch with bare fingers.
Install the light source 2 in
the light housing by turning it
clockwise.
OE
Insert inside end of lens into
light housing and close it.
Fit the screw 1.
Replacing license-plate
bulb
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
9
117
z