BMW F 800 GS Rider's Manual page 109

ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension while guiding brake
disk between brake pads of
left-hand brake caliper.
Lift front wheel and insert
axle 4 as far as possible.
Tighten right-hand axle clamp-
ing screws 1 with specified
torque or use suitable tool to
brace for next work step.
Pinch bolt on quick-re-
lease axle
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Install the axis screw 2 with
torque.
Axle screw in front quick-
release axle
22 lb/ft (30 Nm)
Tighten left-hand axle clamping
screws 3 to appropriate torque.
9
107
z