Operating electrical
accessories
Additional devices connected to
onboard sockets can only be put
into operation when the ignition
is switched on. The accessory
remains operational if the igni-
tion is subsequently switched off.
Onboard sockets are switched off
approx. 15 minutes after switch-
ing off the ignition to reduce the
strain on the onboard electrical
system.
Additional devices with low
power consumption are possibly
not detected by the vehicle
electronics. In these cases,
onboard sockets are already
switched off shortly after the
ignition is switched off.
Cable routing
Observe the following when rout-
ing cable from power sockets to
additional devices:
Cables must not hinder the
rider's movement.
Cables must not restrict the
steering angle and driving char-
acteristics.
Cables must not become
trapped.
Luggage
Lashing down luggage
Route luggage belts between
motorcycle and along anti-slip
locks 1.
Route luggage belt 2 as shown
using example of a luggage roll.
Check piece of luggage for se-
cure hold.
Case
Open case
OA
with case
10
131
z