Table of Contents
Advertisement
Insert ABS sensor in its socket
and install screw 1.
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Firmly compress the spring
forks several times.
Tighten right axle clamping
screws 1 to specified tight-
ening torque.
Pinch bolt on quick-re-
lease axle
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Removing rear wheel
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
with center stand
OE
Place motorcycle on center
stand, ensuring that it is rest-
9
109
z
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
