Advertisement
1. Rules for Safe Marker Handling
IMPORTANT: Never carry your TM-7 uncased when not on a playing field.
The non-playing public and law enforcement personnel may not be able
to distinguish between a paintball marker and firearm. For your own safe-
ty and to protect the image of the sport, always carry your TM-7 in a suit-
able marker case or in the box in which it was shipped.
• Treat every marker as if it were loaded.
• Never look down the barrel of a paintball marker.
• Keep your finger OFF the trigger until ready to shoot.
• Never point the marker at anything you don't wish to shoot.
• Keep the marker on "safe" until ready to shoot.
• Keep the barrel blocking device in/ on the marker's barrel when not
shooting.
• Always remove paintballs and propellant source before disassembly.
• After removing air source, point marker in safe direction and discharge
until Marker is degassed.
• Store the marker unloaded and degassed in a secure place.
• Follow warnings listed on the air source for handling and storage.
• Do not shoot at fragile objects such as windows.
• Every person within range must wear eye, face and ear protection designed
specifically to stop paintballs and meeting ASTM standard F1776.
• Always measure your marker's velocity before playing paintball and
never shoot at velocities in excess of 91.44 meters (300 feet-per-second).
READ OWNERS MANUAL BEFORE USING.
2. Introduction and Specifications
Congratulations on your selection of the TM-7 paintball marker. The TM-7
is made to provide you with many years of reliable performance. We are
honored that you have chosen the TM-7 as your marker of choice and
hope you enjoy using this high quality product.
The patented Valve design, Slip Stream™ Solenoid, Hall Effect Sensor
Trigger, Four Position Selector Switch, set new standards for marker technol-
ogy. The TM-7 is precision engineered from Aircraft grade Aluminum and
Composite, to meet the demands of the most competitive players, teams,
and climates. The ultimate intent of the TM-7 is to exceed your expectations.
We expect you to play hard and play frequently and thus the TM-7 was
built with this in mind. All internal parts, wear, and contact surfaces have
been heat treated or hard anodized. The toughest and most resilient mate-
rials and components have been used in the construction of this marker.
The TM-7 operates on Low-Pressure. The main operating pressure is 180-200 PSI.
The pressure can be nominally adjusted and monitored visually via the gauge on
the bottom-line regulator. There is no secondary regulator to worry about.
T T M M - - 7 7 S S p p e e c c i i f f i i c c a a t t i i o o n n s s
Model- TM-7
Barrel- 9" Ported Barrel
Caliber-68
Action- Semi Auto, Ramping, and Full Auto
Air source- Compressed Air
Battery- One 9 Volt
Cycle Rate- 20 BPS
Shell Material- Composite
Main Body material- Aluminum
Accuracy Range- 150ft +
Weight– 2.5 lbs
I I n n c c l l u u d d e e d d w w i i t t h h y y o o u u r r T T M M - - 7 7
- 9" Barrel (.691 bore)
- Allen Keys
- Spare Parts
- Barrel Blocking Device
- One 9 Volt Battery
B T P A I N T B A L L . C O M
1
Advertisement
