Description - Satelec Acteon Mini LED III Supercharged User Manual

MLED III Supercharged U2
III – DESCRIPTION
3.1 PHYSICAL DESCRIPTION
The Mini LED SuperCharged includes the following
components:
- Handpiece (fig.1-1).
- Lithium-ion battery (fig.1-8).
- Multi-fiber light guide, 45° curve, Ø 7.5 mm,
sterilizable (fig.2-2).
- Charging base with handpiece holder (Fig. 1-9 and 11).
- AC adapter (FRIWO FW7660M/12) (fig.1-12).
- The rigid protection shield.
- Accompanying documentation.
On option:
Multi-fiber opalescent light guide, 45° curve, Ø 5.5 mm,
sterilizable.
kit of 5 Flexible protective shields, sterilizable.
3.2 TECHNICAL DESCRIPTION
The Mini LED SuperCharged is equipped with a Light-
Emitting Diode (LED) that emits blue visible light of a
wavelength between 420 and 480 nm for the
photopolymerization of dental materials.
- LCD (Liquid Cristal Display) screen (Fig.2-5)
The LCD screen is backlit and allows the display of the
different pieces of information required by the user.
The LCD comprises, from top to bottom:
- Display of time counter for polymerization light
emission time, expressed in seconds.
- A pictogram indicating the Fast, Pulse, and Stepped
menus.
Pictogram
- Display of the battery charge level status (battery being
most charged when all of the pictogram's round symbols
are displayed and the least charged when all of the
round symbols have disappeared from the LCD screen).
V5:Mise en page 1
Time counter
Fast-Cure, Pulse-Cure, Step-Cure Menus
Battery charge indicator
Modes
Fast-Cure mode
Pulse-Cure mode
Step-Cure mode
22/02/2010 12:47
- Control buttons (fig. 1 - 3/6/7)
The handpiece comprises three buttons:
- An ON/OFF button (fig.2-3) to start or stop the
polymerization cycle.
- Left button (fig.2-6) for selecting modes.
- Right button (fig. 2-7) for selecting the exposure time.
- Types of modes
You can choose three types of modes by pushing the left
button (fig. 2-6):
- Exposure times
Once the mode has been selected, you can choose the
exposure time by pushing the right button (fig.2-7):
- Fast-Cure mode (full power):
- 3 seconds (show 03) ;
- 4 seconds (show 04) ;
- 5 seconds (show 05) ;
- 10 seconds (show 10) ;
- Pulse-Cure mode:
- 5 shots of 1 second (full power with emission of 5
successive one second flashes with a rest of period of
250 ms between flashes) - (show 05);
- 10 shots of 1 second (full power with emission of 10
successive one second flashes with a rest of period of
250 ms between flashes) - (show 10) ;
- Step-Cure mode:
- 6 seconds progressively and 3 seconds at full power
(show 09) ;
- 10 seconds progressively and 5 seconds at full power
(show 15).
- Types of warnings
An audible alarm (beep) is triggered at the start of
polymerization.
- Charge time
Battery charge time is about
- Battery charge level indicator
When only one element of the pictogram remains (the
one farthest to the right on the LCD screen), two beeps
warn you that there are about 500 seconds of
polymerization remaining.
The operator is then invited to return the Mini LED
SuperCharged to the charging base.
When the battery is completely discharged, the LCD
screen displays the message "Lb" (Low battery) and no
8
Page 8
3 hours.